Akai S612 MD280 QD drive replacement

I am using a Flashfloppy GOTEK to read and write S612 samples onto USB.

But first, it is mandatory to send the QD drive to retirement, in great condition.

To replace the QD drive belt, you will need an appropriate belt, with a square profile

Then we will flash a GOTEK SFR1M44 using Flashfloppy.

Once done, download the latest version of Flashfloppy-you will need to copy the configuration file (FF_QD.CFG) that you will find in the /alt folder onto the USB pendrive that you are going to use with the Akai. Rename it FF.CFG and place it on the root directory of the pendrive.

We would also need a QD to Shugart interface-JazzCat sells these. Watch this:

It is mandatory to have an OLED screen to use this GOTEK setup

Connect the wires like so to the new oled screen

Connect the new screen (must be less than 2” big) according to this pinout

Remember to jumper MO and JC on the Gotek

Have fun!